_______________________________________________________________________________
         Gowin_SDM οĶָ
----------------------------------------------------------------------
ĿGW2A-LV18PG256C8/I7
----------------------------------------------------------------------
ļб
----------------------------------------------------------------------
.
| -- docs
|    `-- readme.txt				-->	ļ
| -- project
|    |	`-- fpga_project.gprj			-->	οƹ
|    |-- src
|      	|  `-- sdm_exp.v			-->	̶ģ
|      	|  `-- demo.cst
|      	|  `-- fpga_project.sdc
|       |   -- sdm
|        	|   `-- sdm.ipc
|        	|   `-- sdm.v
|        	|   `-- sdm.vo		    -->	ʹvoļ
|       |  --gowin_rpll
|    |-- impl
| -- simulation
|    |-- ModelSim
|       |   `-- cmd.do				-->	modelsimű
| -- tb
|    `-- tb_mod.v					-->	modelsimtestbench
|    `-- prim_sim.v				    -->	ԭ

----------------------------------------------------------------------
ʹ˵
	1⣺ʹԴļfpga_project.gprjù̶ģ飬ۺϣʹԼʱԼ󲼾ֲߺزԡʹʾץȡݡ
	2modelsim棺űModelsimļ

	עtbļprim_sim.vοûڷʱʹ°滻

_______________________________________________________________________________
        Example Gowin_SDM Design Readme
----------------------------------------------------------------------
Object deviceGW2A-LV18PG256C8/I7
----------------------------------------------------------------------
File List:
----------------------------------------------------------------------
.
| -- docs
|    `-- readme.txt				-->	Read Me file (this file)
| -- project
|    |	`-- fpga_project.gprj		-->	Gowin Project File for Example Design
|    |-- src
|      	|  `-- sdm_exp.v			-->	File for Gowin Project
|      	|  `-- demo.cst
|      	|  `-- fpga_project.sdc
|       |   -- sdm
|        	|   `-- sdm.ipc
|        	|   `-- sdm.v
|        	|   `-- sdm.vo		    -->	Verilog simulation File for tb
|       |  --gowin_rpll
|    |-- impl
| -- simulation
|    |-- ModelSim
|       |   `-- cmd.do				-->	modelsim simulation script
| -- tb
|    `-- tb_mod.v					-->	TestBench for modelsim simulation
|    `-- prim_sim.v				    -->	Verilog functional simulation library

----------------------------------------------------------------------
Instructions:
	1Onboard test:Launch Gowin and select "File -> Open -> Project", set Top Module and Include Path. After Sythesize, cofigure Physical Constraints and SDC Config Files.
	2modelsim simulation:Use script in Modelsim folder.

	Note: The prim_sim.v under the tb folder is for reference only. It is recommended that users replace it with the latest version during simulation.