﻿_______________________________________________________________________________
         Fixed to Float参考设计阅读指南
----------------------------------------------------------------------
目标器件：GW2A-LV55PG484C8/I7
----------------------------------------------------------------------
文件列表
----------------------------------------------------------------------
.
| -- docs
|    `-- readme.txt						-->	自述文件
| -- proj
|    |	`-- Fixed_to_Float.gprj			-->	参考设计工程
|    |-- src
|    	|   -- data
|        	|   `-- x.dat
|      	|  `-- top.v					-->	工程顶层模块
|      	|  `-- Fixed_to_Float.cst
|      	|  `-- Fixed_to_Float.rao
|      	|  `-- Fixed_to_Float.sdc
|       |   -- Fixed_to_Float
|        	|   `-- Fixed_to_Float.ipc
|        	|   `-- Fixed_to_Float.v
|        	|   `-- Fixed_to_Float.vo	-->	仿真使用vo文件    
|    |-- impl
| -- simulation
|    |   `-- cmd.do						-->	modelsim仿真脚本
|    |   `-- do.bat
| -- tb
|    `-- tb.v							-->	modelsim仿真testbench
|    `-- prim_sim.v						-->	仿真原语库    

----------------------------------------------------------------------
使用说明：
	1、板测：使用云源软件打开上述文件中Fixed_to_Float.gprj，设置工程顶层模块，综合；根据所使用器件设置约束和gao.v后布局布线后下载测试。使用GAO抓取数据。
	2、modelsim仿真：仿真脚本存放于Modelsim文件夹中

	注：tb文件夹下prim_sim.v仅供参考，建议用户根据情况在仿真时使用最新版替换。

_______________________________________________________________________________
       Fixed to Float Design Readme
----------------------------------------------------------------------
Object device：GW2A-LV55PG484C8/I7
----------------------------------------------------------------------
File List:
----------------------------------------------------------------------
.
| -- docs
|    `-- readme.txt						-->	Read Me file (this file)
| -- proj
|    |	`-- Fixed_to_Float.gprj			-->	Gowin proj File for Example Design
|    |-- src
|    	|   -- data
|        	|   `-- x.dat
|      	|  `-- top.v					-->	top module
|      	|  `-- Fixed_to_Float.cst
|      	|  `-- Fixed_to_Float.rao
|      	|  `-- Fixed_to_Float.sdc
|       |   -- Fixed_to_Float
|        	|   `-- Fixed_to_Float.ipc
|        	|   `-- Fixed_to_Float.v
|        	|   `-- Fixed_to_Float.vo	-->	Verilog simulation File for tb    
|    |-- impl
| -- simulation
|    |   `-- cmd.do						-->	modelsim simulation script
|    |   `-- do.bat
| -- tb
|    `-- tb.v							-->	TestBench for modelsim simulation
|    `-- prim_sim.v						-->	Verilog functional simulation library    

----------------------------------------------------------------------
Instructions:
	1、Onboard test:Launch GOWIN FPGA Designer and select "File -> Open -> Fixed to Float", set Top Module and Include Path. After Sythesize, cofigure Physical Constraints and GAO Config Files.
	2、modelsim simulation:Use script in Modelsim folder.

	Note: The prim_sim.v under the tb folder is for reference only. It is recommended that users replace it with the latest version during simulation.
