﻿        PID_Controller_3p3z Design Readme
----------------------------------------------------------------------
Object device: GW2A-LV18PG256C9/I8
----------------------------------------------------------------------
File List:
----------------------------------------------------------------------
.
| -- docs
|	`-- readme.txt									-->	Read Me file (this file)
| -- project
|	`-- pid_controller_3p3z.gprj					-->	reference Design project
|	|-- src
|	|  `-- top.v									-->	Top Test module
|	|  `-- pid_controller_3p3z_top.cst				--> Timing Constraints file
|	|  |-- pid_controller_3p3z						--> IP file
|	|  |	`-- pid_controller_3p3z.v				--> IP encrypted source file
|	|  |	`-- pid_controller_3p3z.vo				--> IP post-sim netlist file
|	|-- impl
|	|	|-- pnr
|	|   | 	`-- pid_controller_3p3z.ipc
|	|   | 	`-- pid_controller_3p3z.v
|	|   | 	`-- pid_controller_3p3z.vo				-->	post-simulation file of Top module
| -- simulation
|	|-- lib
|	|  `-- prim_sim.v								-->	simulation library 			
|	|-- ModelSim				
|	|   `-- cmd.do									-->	modelsim script
|	|   `-- do.bat									-->	script
| -- tb				
|	|   `-- tb.v										-->	testbench file
----------------------------------------------------------------------
Instructions:
	1、modelsim version： Modelsim SE-64 10.4。
	2、modelsim simulation: dobouble-click the script (./sim/do.bat).

	Note: The prim_sim.v under the tb folder is for reference only. 
	It is recommended that users replace it with the latest version during simulation.



